Author Topic: ICOM Service Providers (?Factory Authorized? and private individuals).  (Read 2027 times)

0 Members and 1 Guest are viewing this topic.

Offline W1RC

  • NEAR-Fest Founder & Benevolent Dictator.
  • Administrator
  • Extra
  • *****
  • Posts: 900
  • Karma: +9/-0

This is a list of companies and individuals who troubleshoot and repair ICOM Radios.  They are listed in the order that I personally would send a radio to them for repair or service.  Please note that this list is not an endorsement by NEAR-Fest for any of them but a Google or eHam search will produce several reviews on their performance.  The opinions expressed herein are strictly mine; no one elses?.

I have also added a couple other independent technicians that do other popular makes at the bottom of this documents.

Malcom Technical Support (MTS)
Scott Malcom
5130 Jackson Hwy
Toledo, WA 98591-8680
mts@toledotel.com
(360) 998-4100
http://mts-icom.wixsite.com/hamradiorepair
Former ICOM technician (ten years).  $60 per hour, works on older radios, rebuilds rotary digital encoders as well as all ICOM except ?big box Radios?, R9000, IC-781, IC-7800 etc.  Also services late model Kenwood.  Shop turnaround 14-21 days.  Scott strongly prefers communications by email which he answers promptly.  He is at the top of my list because of his fast turnaround, reasonable hourly rate and competency.  But two-way shipping costs add to the bottom line and turnaround time but this is, of course, no fault of Scott?s.  Mobiles and portables won?t apply because they can go by USPS Flat Rate and they claim 2-Day service to Toledo WA.
UPDATE:  Scott has announced that after 40 years he is retiring. He tells me he will continue to accept repair work from his existing customers.

Charles Dunn, W1CBD,
NH Radio Works,
4 Griffin Road,
Hudson NH  03051
cbd@nhradioworks.com
603-689-8105
Highly competent, does great work, reasonable rates. He does radio repairs as a sideline and this may affect your experience as far as turnaround time goes. Check with him for turnaround time.
UPDATE:  Charlie has asvised me he is not accepting any repair work for the time being.

Sultantronics,
Bruce Weber W7BCW
PO Box 1707
Sultan, WA 98294
360-793-9513
bruce@sultantronics.com
www.sultantronics.com
www.sultantronix.com
Bruce is also a former Icom bench technician now providing ICOM radio service.  He also manufactures a replacement rotary digital encoder board for the IC-735 and other similar radios which he sells at a very reasonable price.  These are unobtanium  from ICOM.  If you prefer send him your encoder and he will install it for a very minimal charge.

Paul Hansen, W6XA
2134 Carthage Rd
Tucker, GA 30084
(864) 222-3539
pwhansen@bellsouth.net
http://www.amateurradioservice.com also w6xa.com

Services ICOM and later Yaesus and Kenwoods. Paul does not do the ?big box? radios.  Hourly rate is $84; $164 if someone has tried to fix it and failed.  Check with him for current turn-around time.  I have had no experience with Paul but I have read lots of good online reviews from satisfied customers. 


Icom Service Midwest
SAR Technical Services, Inc.
Matt Adrian, owner
1792 Nash Dr.
St. Joseph, MI 49085
mailto:sarts@qtm.net
269-429-2334
http://www.sarts1.com
Factory authorized service center.
No comments or experience with this facility.

Willco Electronics
3408 Avondale Lane
New Lenox IL. 60451
Jack WA9FVP
(815)463-9365
repair@willcoele.com
http://www.willcoele.com/radio_repair/
No comments or experience with this facility.

IF ALL ELSE FAILS:
ICOM AMERICA
http://www.icomamerica.com/en/support/partsandservice/servicecenters.aspx
http://www.icomamerica.com/en/support/downloads/New-Icom-Service-Fees.pdf

Jeff Covelli, WA8SAJ
5368 Melody Lane
Willoughby OH 44094
Wa8saj@gmail.com


ANDREW L RUGGIERO, WD8BWW
4129 NE GEORGIAN DR
LEES SUMMIT, MO 64064-1374
andyit28@gmail.com Kansas City MO